|
Designation |
Symbol |
Description |
|
交貨狀態 |
代號 |
說明 |
|
Cold finished (hard) |
BK（+C） |
Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation |
|
冷加工（硬） |
最后冷加工之后不進行熱處理， 從而管子只可能進行很小的變形。 |
|
|
Cold finished (Soft) |
BKW
（+LC） |
The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) |
|
冷加工（軟） |
最后熱處理之后進行小變形量的冷加工， 對鋼管再加工時允許有限的冷變形（例如： 彎曲， 擴口） |
|
|
Cold finished and stress-relieved |
BKS（+SR） |
Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. |
|
冷加工后消除應力退火 |
最后冷加工后在Acl點以下進行退火， 以消除冷加工應力。 |
|
|
Annealed |
GBK（+A） |
The last Cold forming process is followed by annealing in a controlled atmosphere. |
|
退火 |
最后冷加工之后，鋼管在保護氣體下進行完全退火。 |
|
|
Normalized |
NBK（+N） |
The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
|
正火 |
最后冷加工之后，鋼管在保護氣體下進行正火。 |
|
